| Parameter names in the command line version |
Parameter names in the GUI version |
| |
| Switch on/off(1/0) module | Module name in GUI |
|---|
| |
| compute_uncertainties_internally | S/N estimator |
| have_uncertainties = 0 | Specify uncertainty images in the GUI flow |
| run_detect_medfilter | Detect Med Filter |
| run_gaussnoise | Gauss Noise |
| run_pointsourceprob | Point Source Probability |
| run_bright_detect | Bright Detect |
| run_detect | Detect |
| run_select_detect | Select Detect |
| run_extract_medfilter | Extract Med Filter |
| run_fit_radius | Fit Radius |
| run_sourcestimate | Source Estimate |
| run_aperture | Aperture Photometry |
| run_select | Select |
| | |
| | Initial Setup |
| INPUT_FILE_NAME | Input File Name |
| OUTPUT_DIR | Output Directory |
| SIGMA_FILE_NAME | Sigma File Name |
| COVERAGE_MAP | Coverage Map |
| PMask_Fatal_BitPattern | N/A (see Table Footnote) |
| SIGMA_FILE_NAME | N/A |
| RMASK_FILE_NAME | N/A |
| IMAGELIST_FILE_NAME | N/A |
| PMASK_FILE_NAME | N/A |
| RMask_Fatal_BitPattern | N/A |
| | |
| Apex single frame setting |
|---|
| PRF_file_name | PRF File Name |
| PRFMAP_FILE_NAME | PRF Map File Name |
| DCE_STATUS_MASK_LIST | DCE Status Mask List |
| DCE_Status_Mask_Fatal_BitPattern | DCE Status Mask Fatal Bit Pattern |
| use_psp_to_detect | use PSP to detect |
| PROBABILITY_THRESHOLD | Probability Threshold |
| use_bright_object_mask | Use Bright Object Mask |
| use_extract_table_for_aperture | Use Extract Table for Aperture |
| use_refined_pointing | Use Refined Pointing |
| use_background_subtracted_image_for_fitting | Use Background Subtracted Image for Fitting |
| use_background_subtracted_image_for_aperture | Use Background Subtracted Image for Aperture |
| | |
| SNESTIMATORIN | S/N estimator |
| Read_Noise | Read Noise in e- |
| Confusion_Sigma | Confusion Sigma in e- |
| Gain | Gain in e-/image unit |
| SIGMA_DIR | S/N estimator output subdirectory |
| | |
| DETECT_MEDFILTER | Detect Med Filter |
|---|
| Window_X | Window X |
| Window_Y | Window Y |
| N_Outliers_Per_Window | Outlier / Window |
| Max_Bad_Pixels_OutputImage | N/A** |
| Min_GoodNeighbors_Number | Min Good Neighbors Number |
| Min_Good_Pixels_In_Window | Min Good Pixels in Window |
| | |
| GAUSSNOISE | Gauss Noise |
|---|
| Window_X | Window X |
| Window_Y | Window Y |
| Max_BadPixels_OutputImage | N/A** |
| N_Outliers_Per_Window | Number of Outliers per Window |
| Min_GoodNeighbors_Number | Min Good Neighbors Number |
| Min_Good_Pixels_In_Window | Min Good Pixels in Window |
| | |
| POINTSOURCEPROB | Point Source Probability |
|---|
| PRF_ResampleX_Factor | PRF Resample X Factor |
| PRF_ResampleY_Factor | PRF Resample Y Factor |
| Apriori_Probability | Apriori Probability |
| PRF_Xsize | PRF X size |
| PRF_Ysize | PRF Y size |
| | |
| BRIGHT_DETECT | Bright Detect |
|---|
| Input_Type | Input Type |
| Detection_Threshold | Detection Threshold |
| Detection_Max_Area | Detection Max Area |
| Detection_Min_Area | Detection Min Area |
| Min_Coverage | Min Coverage |
| Threshold_Type | Threshold Type |
| | |
| DETECT | Detect |
|---|
| Detection_Threshold | Detection Threshold |
| Input_Type | Input Type |
| Detection_Max_Area | Detection Max Area |
| Detection_Min_Area | Detection Min Area |
| Min_Coverage | Minimum Coverage |
| Threshold_Type | Threshold Type |
| Extended_Object_Area | Extended Object Area |
| Window_X (PSP_GAUSSNOISE module) | Window X |
| Window_Y (PSP_GAUSSNOISE module) | Window Y |
| N_Outliers_Per_Window (PSP_GAUSSNOISE) | N Outliers Per Window |
| | |
| SELECTDETECT | Select Detect |
|---|
| select_detect_columns(="srcid,RA,DEC,delta....") | Columns selection: (click srcid etc.) |
| select_detect_conditions(="SNR > 10 and deblend ! NO....") | Condition Builder: (click srcid > value x) |
| | |
| EXTRACT_MEDFILTER | Extract Med Filter |
|---|
| Window_X | Window X |
| Window_Y | Window Y |
| Max_BadPixels_OutputImage | N/A** |
| N_Outliers_Per_Window | Outliers / Window |
| Min_GoodNeighbors_Number | Min Good Neighbors Number |
| Min_Good_Pixels_In_Window | Min Good Pixels in Window |
| Window_X(PSP_GAUSSNOISE) | Window X(Input Type = SNR input) |
| Window_Y(PSP_GAUSSNOISE) | Window Y (PSP_GAUSSNOISE) |
| N_Outliers_Per_Window(PSP_GAUSSNOISE) | N Outliers Per Window(PSP_GAUSSNOISE) |
| | |
| PSP_GAUSSNOISE | Included in Detect Module(see above) |
|---|
| | |
| FIT_RADIUS | Fit Radius (no parameters) |
|---|
| | |
| SOURCESTIMATE | Source Estimate |
|---|
| MinimizeFtolSuccess | Minimize Fto Success |
| PRF_ResampleX_Factor | PRF ResampleX Factor |
| PRF_ResampleY_Factor | PRF ResampleY Factor |
| Max_Number_PS | Max N ps |
| Chi_Threshold | Chi Threshold |
| Background_Fit | Background_Fit |
| Max_N_Iteration | Max N Iteration |
| Fitting_Area_X | Fitting Area X |
| Fitting_Area_Y | Fitting Area Y |
| InputType | Input Type |
| DitherPixelFraction | Dither Pixel Fraction |
| Max_N_Success_Iteration | max N Success Iteration |
| Chi2_Improvement | Chi2_Improvement |
| DitherFluxFraction | Dither Flux Fraction |
| MinimizeFtol | Minimize Ftol |
| DeblendDitherPixelFraction | DeblendDitherPixelFraction |
| N_Edge | N Edge |
| Random_Fit | Random_Fit |
| Normalization_Radius | Normalization_Radius |
| | |
| APERTURE | Aperture Photoemetry |
|---|
| N_Apertures | N Apertures |
| Aperture_Radius_1 | Aperture Radius 1 |
| Aperture_Radius_2 | Aperture Radius 2 |
| Aperture_Radius_3 | Aperture Radius 3 |
| Min_Number_Pixels | Min Number Pixels |
| Annulus_Compute_Type | Annulus Compute Type |
| Use_Annulus | Aperture Photometry/Use Annulus |
| Inner_Radius | Inner Radius |
| Outer_Radius | Outer Radius |
| | |
| Select | Select |
|---|
| select_columns = "srcid, detid, etc" | Columns selection |
| select_conditions = "SNR>6.0 and dblend ! NO etc" | Condition Builder |
| Note -- (1) All bold-faced names are the modules or the names of parameter blocks in the GUI flow. |
| Note -- (2) N/A means that these parameters were exported and saved into the namelist file from the GUI, but they |
| are not used when apex_1frame is run on command-line. |
| Note -- (3) N/A** means that the parameter is set implicitly in the GUI flow. |
