| Parameter names in the command line version |
Parameter names in the GUI version |
| |
| Switch on/off(1/0) module | Module name in GUI |
|---|
| |
| compute_uncertainties_internally | S/N estimator |
| have_uncertainties = 0 | Specify uncertainty images in the GUI flow |
| run_fiducial_image_frame | Fiducial Image Frame |
| run_medfilter | Med Filter |
| run_detect | Detect |
| run_mosaic_interp | Mosaic Interpolate |
| compute_overlap_correction | Overlap Correction |
| mosaic_corrected_images | Quick Look Mosaic |
| |
| | Initial Setup |
| IMAGE_STACK_FILE_NAME | Image Stack File |
| OUTPUT_DIR | Output Directory |
| | (1) Optional Input & Mask Files (see Footnote) |
| SIGMALIST_FILE_NAME | Sigma List File |
| DCE_STATUS_MASK_LIST | DCE Status Mask List |
| RMASK_LIST | Rmask List File |
| DCE_Status_Mask_Fatal_BitPattern | DCE Status Mask Fatal Bit Pattern |
| RMask_Fatal_BitPattern | Rmask Fatal Bit Pattern |
| PMask_Fatal_BitPattern | Pmask Fatal Bit Pattern |
| FIF_FILE_NAME | FIF file |
| (2) General Options |
|---|
| MOSAIC_PIXEL_SIZE_X | Pixel Size X |
| MOSAIC_PIXEL_SIZE_Y | Pixel Size Y |
| MOSAIC_PIXEL_RATIO_Y | Pixel Ratio Y |
| MOSAIC_PIXEL_RATIO_X | Pixel Ratio X |
| OverlapCorrectionTable | N/A (see footnote) |
| MOSAIC_IMG_FILE_NAME | N/A |
| OVERLAP_CORR_DIR | N/A |
| COMPUTE_OVERLAP_NAME | N/A |
| OVERLAP_CORR_FILE_NAME | N/A |
| COADDER_DIR | N/A |
| |
| | Overlap Settings |
| USE_REFINED_POINTING | Use Refined Pointing |
| delete_intermediate_files | Delete Intermediate Files |
| |
| SNESTIMATORIN | S/N estimator |
| Read_Noise | Read Noise in e- |
| Confusion_Sigma | Confusion Sigma in e- |
| Gain | Gain in e-/image unit |
| SIGMA_DIR | S/N estimator output subdirectory |
| |
| |
| FIDUCIALIMAGEFRAMEIN | Fiducial Image Frame |
|---|
| CROTA2 | CROTA2 |
| CROTA2 = A | Use average input orientation |
| Coordinate_System | Coordinate System |
| Projection_Type | Projection |
| Edge_Padding | Edge Padding |
| |
| MEDFILTER | Med Filter |
|---|
| Window_X | Window |
| Window_Y | Window |
| N_Outliers_Per_Window | Outliers/Window |
| MEDFILTER_DIR | Med Filter output subdirectory |
| |
| DETECT | Detect |
|---|
| Detection_Max_Area | Detection Max Area |
| Detection_Min_Area | Detection Min Area |
| Detection_Threshold | Detection Threshold |
| Threshold_Type | Threshold Type |
| DETECT_DIR | Detect output subdirectory |
| |
| MOSAICINTIN | Mosaic Interpolate |
|---|
| GRID_RATIO | Grid Ratio |
| DRIZ_FAC | Drizzle Factor |
| INTERP_METHOD | Interpret Method |
| ALPHA | Alpha |
| FINERES | Fine Res |
| mask_bright | Mask bright object |
| INTERP_DIR | Mosaic Interpolate output subdirectory |
| |
| COMPUTEOVRLAPCORRIN | Overlap Correction |
|---|
| MIN_IMG_NUM | Minimum Number of Images
|
| TOP_THRESHOLD | Top Threshold
|
| BOTTOM_THRESHOLD | Bottom Threshold
|
| apply_overlap_correction | Apply Overlap Correction |
| |
| MOSAICCOADDIN | Quick Look Mosaic |
|---|
| TILEMAX_Y | Mosaic Co Adder: Tile Max X |
| TILEMAX_X | Mosaic Co Adder: Tile Max Y |
| Note -- (1) All bold-faced names are the modules or the names of parameter blocks in the GUI flow. |
| Note -- (2) N/A means that these parameters were exported and saved to a file by the GUI, but they are |
| not used when apex_1frame is run on command-line. |
| Note -- (3) Initial Setup has two sub-settings dialogs: one is Optional Input & Mask Files and the second |
| one is General Otpions. |
